Table of Contents
Advertisement
GCA70–226
12
Symptom
INTERCOM light flashing
HOLD light flashing with no line on
hold.
MUTE light on.
SPEAKER light on steady.
Error Tone
(three steady tones)
If you can not receive a voice
announce call.
Troubleshooting Your Telephone
Troubleshooting
Your Telephone
Possible Cause
Your messaging is set. Press
INTERCOM, then dial # 02 and hang
up.
Station is ringing with ringer off.
Another telephone has activated your
message waiting light. Press
INTERCOM and then press HOLD
to retrieve message. This action will
call party who activated light. Once
you have received message, party who
activated light (while still talking to
you) must press INTERCOM to turn
off the light.
MUTE is activated. To cancel, press
MUTE.
Background music feature activated
even though the system does not
provide background music. To cancel,
press INTERCOM then dial #1.
May occur when incorrect buttons are
pressed during speed dial
programming. For example, if a button
has a line assigned to it, or was not
enabled for speed dial programming
by the installer.
Voice announce block has been
activated. To cancel, press
INTERCOM then dial #2.
LCD Speakerphone Reference Manual 12 – 1
Advertisement
Table of Contents
