Table of Contents
Advertisement
Using The Attendant Features
• To store the LCD messages, proceed as follows:
1. Write your messages on the chart on page 10–4 (each message
can have up to 16 characters).
2. Use the letter code table on page 10–3 to assign a number to
each character.
3. Write these numbers on the chart line beside the characters in
your message.
4. Press INTERCOM.
5. Dial
# 0
6. Dial a message location number (01–30).
7. If message currently exists at selected location, dial # to clear it.
8. Compose your messages by dialing the two-digit codes that
relate to the letters.
9. Dial # to save message.
10. Dial next location number, # to clear it (if necessary), two-digit
codes for the message, and # to save.
11. Repeat previous step until all messages are stored,
12. Press SPEAKER to end.
Example: Create the LCD message "TAKE MESSAGE" and program it
into message location number 3.
1. Press INTERCOM, dial
2. Dial 0 3
#
.
3. Dial code numbers for message.
81
21
52
T
A
K
4. Dial # and press SPEAKER to end.
10 – 2 LCD Speakerphone Reference Manual
1 2.
#
0
1 2.
32
12
61
32
E
M
E
GCA70–226
73
73
21
41
32
S
S
A
G
E
Advertisement
Table of Contents
