Table of Contents
Advertisement
Using The Attendant Features
10.9 Setting The System Clock
The system clock provides a date and time for display at LCD
speakerphones connected to the system.
• To program the system clock for current date and time,
1. Press INTERCOM.
2. Dial
#
0
0 1.
3. Dial two digits (01–12) for month.
4. Dial two digits (01–31) for day.
5. Dial two digits (00–99) for year.
6. Dial two digits (00–23) for hour.
Example: 8:15 PM = 2015 (enter 20 for hour)
7. Dial two digits (00–59) for minute.
Example: 8:15 PM = 2015 (enter 15 for minute)
8. Dial
#
to save.
9. Press SPEAKER to end.
10.10 Storing The System Speed Dial Numbers
You can store up to 500 system speed dial numbers at your attendant
telephone. Typically, these are numbers that are frequently called by
many different users and emergency numbers that you want readily
available to everyone. Distribute a list of these stored numbers to the
system users.
• To program system speed dial numbers,
1. Record the following information on the system speed dial
record sheet:
the dialing code of the storage location (100–599),
the line that will be used to access each outside number,
the telephone numbers you are storing.
2. Press INTERCOM.
3. Dial
# 0
4. Dial code for storage location (100–599).
10 – 18 LCD Speakerphone Reference Manual
0 2.
GCA70–226
Advertisement
Table of Contents
