Sending And Receiving Non-Verbal Messages; Message Waiting Light - Comdial Digitech 7700S Series User Manual

Sending And Receiving Non-Verbal Messages
Message Waiting Light
If your telephone is designated as a central message desk by the system
or has message wait originate ability, you can turn on the message wait-
ing light (above HOLD) of any other telephone and cause dial tone at
that telephone to sound in a broken manner. This lets that telephone
user know that you have a message for him.
To turn on the message waiting light and broken dial tone at another
telephone,
l
press ITCM,
l
dial%3,
l
dial extension number of station to be alerted. The message wait-
ing light of called station will flash.
To turn off the message waiting light and broken dial tone at another
telephone,
l
press ITCM,
l
dial#3,
l
dial extension number of station that was alerted. The message
waiting light of called station will turn off.
To turn off the message waiting light during message-delivering conver-
sation,
l
press ITCM.
To receive a message at an alerted station,
l
observe flashing message waiting light or hear the broken dial
tone,
l
press ITCM HOLD. Connection to station that left message is
automatic.
54