Attendant Features; Lcd Messages - Comdial DXP, DXP Plus, FX Attendant Manual

GCA70250

8. ATTENDANT FEATURES

8.1 LCD Messages

System users send and receive non-verbal messages for display on
their LCD speakerphones. The system provides five messages and
you can add up 25 customized messages. You can even store cus-
tomized messages in place of the default messages if you wish, thus
increasing the number of custom messages available. Distribute a list
of the LCD messages to the system users for their reference.
• To store the LCD messages, proceed as follows:
1. WRITE your messages on the chart on page 99 (each message can
have up to 16 characters).
2. USE the letter code table on page 98 to assign a number to each char-
acter AND WRITE these numbers on page 98 on the chart line beside
the characters in your message.
3. PRESS INTERCOM.
4. DIAL *#0*12.
5. DIAL a message location number (01 to 30).
6. IF message currently exists at location, DIAL # to clear.
7. COMPOSE your messages by dialing the 2-digit codes that relate to
the letters.
8. DIAL # to save message.
9. REPEAT previous step until all messages are stored.
10. PRESS SPEAKER to end.
August, 03 Comdial
Attendant Manual
101