Nortel CallPilot 100 Administration Manual page 86

86 Chapter 7 Off-premise Message Notification
Show:<xxxx>
CHNG
Notify: pager
CHNG
More dest?
YES NO
Msg type: new
CHNG
Msg notify
ADMIN SELECT
P0607190 03
Press NEXT or £ to accept the default pager message represented
8
NEXT
by <xxxx>. The default pager message sent by CallPilot is the
CallPilot extension. This is the sequence of digits that is sent after
the pager service is dialed, to notify you of who is paging you
or
press CHNG or ⁄ to change the pager message.
The combined limit is 30 characters for the pager telephone
number and the pager message.
9 The display shows notification is set up to a pager.
NEXT
Press NEXT or £ to continue.
10 Press YES if you want to set up another destination number
or
press NO if you do not want to set up another destination number.
11 Press OK or £ if you want to be notified when the skillset mailbox
OK
receives a new message
or
press CHNG or ⁄ if you want to be notified only when the skillset
mailbox receives an urgent message.
12 Press ® to end the session.