Nortel CallPilot 100 Administration Manual page 76

76 Chapter 7 Off-premise Message Notification
To set up Off-premise Message Notification to more than one
destination
You can receive notification of a message at a maximum of five different destination numbers. The
following steps show you how to enter a telephone number destination and then add a pager
destination for the first time.
Msg notify
ADMIN SELECT
Destination:
PHONE EXT
Ph:
RETRY
<x>
ADD
Start: hhmm:
RETRY
<start time>
RETRY AM
P0607190 03
≤
1 Press
Follow the voice prompts or the display button options to open the
skillset mailbox.
2 If you use the CallPilot interface:
Press °fi to open the Mailbox Tools
•
Press NOTIF or ¤ to open the Off-premise Message
•
Notification menu
• Go to step 3
If you use the Norstar Voice Mail interface:
Press ADMIN or °
•
Press fl to open the Off-premise Message Notification
•
menu
• Go to step 3
Press ADMIN or ⁄ to set up Off-premise Message Notification.
3
Press PHONE or ⁄ to choose a destination telephone number.
4
PAGER
Enter the destination telephone number and press OK or £. The
5
OK
destination telephone number cannot be longer than 30 digits.
Press OK or £ to accept the destination telephone number,
6
OK
represented by <x>
or
press ADD or ¤ to add special characters and use your dialpad or
follow the voice prompts to add characters.
7 Enter the start time for Off-premise Message Notification. This is a
OK
four-digit field. Any single-digit hour and minute must be preceded
by a zero.
Press AM or ⁄
8
PM
or
PM or ¤.
·°⁄.