Overview - First Time Users Only; Introduction; Smv 3000 Smart Multivariable Transmitters - Honeywell SMV 3000 User Manual

Section 1
1.1

Introduction

Section Contents
About This Section
ATTENTION
STIMV IOP Module
Revision Level
1/99

Overview - First Time Users Only

This section includes these topics.
Topic
1.1 Introduction ..............................................................................1
1.2 CE Conformity (Europe) ...........................................................3
1.3 SMV 3000 Smart Multivariable Transmitters ............................4
1.4 Smartline Configuration Toolkit (SCT 3000) .............................7
1.5 Smart Field Communicator (SFC) ............................................8
1.6 Transmitter Order................................................................... 11
This section is intended for users who have never worked with our
SMV 3000 Smart Multivariable Transmitter and the SCT 3000 Smartline
Configuration Toolkit before. It provides some general information to
acquaint you with the SMV 3000 transmitter and the SCT 3000.
To be sure that you have the SCT software version that is compatible with
your SMV 3000, please note the following table.
If your SMV 3000 contains
software version . . .
1.1 through 1.5
2.1
2.5 or 3.1
2.5, 3.1 or 4.0
* If the SMV 3000 will be integrated with our TPS/TDC control systems,
you must have an STIMV IOP module in your Process Manager,
Advanced Process Manager, or High Performance Process Manager.
The STIMV IOP module must be at least revision level 5.3 or greater to
be compatible with the SMV 3000. Contact your Honeywell
representative for information on upgrading an STIMV IOP.
SMV 3000 Transmitter User's Manual
Then use this compatible
SCT software version . . .
3.06.00
3.11.2
3.12.3
4.02.013a
See Page
* Compatible TDC
STIMV IOP module
5.3
1