Fitting The Control Panel - DURKOPP ADLER 867 Operating Manual

Set-up instructions
Long arm
machines
Operating manual 867 Version 01.0 - 12/2012

7.11 Fitting the control panel

Figure 59: Fitting the control panel – Part 1
1
2
(1) - Upper machine cover
(2) - Valve cover
1. Unscrew the valve cover (2) and upper machine cover (1).
2. Screw the control panel (5) firmly onto the control panel
bracket (4).
Additional step for long arm machines:
3. Install the connecting cable through the cable duct (3).
Figure 60: Fitting the control panel – Part 2
4. Install the connecting cable (6) in the machine arm.
5. Guide the cable through the hole in the table plate.
6. Insert the plug of the connecting cable in the socket of the
control.
7. Screw on the valve cover (2) and upper machine cover (1).
(3) - Cable duct (long arm only)
(4) - Control panel bracket
(5) - Control panel
6
(6) - Connecting cable
5
4
3
89