Connecting The Electrical Knee Switch - DURKOPP ADLER 867 Operating Manual

Set-up instructions
Operating manual 867 Version 01.0 - 12/2012

7.12.7 Connecting the electrical knee switch

Figure 68: Connecting the knee switch
1
2
(1) - Earth connection on the rear side of the controller
(2) - DAC controller connection socket: Rear side
(3) - Efka controller connection socket: Front side
1. Connect the knee switch earthing cable to the rear side of the
controller (1).
2. Insert the plug of the knee switch in the socket of the respective
controller:
• DAC ECO and DAC CLASSIC controllers:
Socket (2) on the rear side of the controller
• Efka DC1550/DA321G controller:
Socket KN19 (3) on the front side of the controller
3
99