Setting The Operating Pressure; Pneumatic Foot Lifting - DURKOPP ADLER 867 Operating Manual

104

7.13.2 Setting the operating pressure

Correct setting
The operating pressure for the pneumatic unit is 6 bar.
ATTENTION
Machine damage possible due to incorrect pressure.
An incorrect pressure can cause damage to the machine.
Make sure that the operating pressure is set correctly before
putting the machine into operation.
Figure 73: Setting the operating pressure
2
0
1. Pull the turning handle (1) up.
2. Set the operating pressure in such a way that the pressure
indicator (2) indicates 6 bar:
• To increase the pressure: Turn the rotary handle (1)
clockwise.
• To reduce the pressure: Turn the rotary handle (1) coun-
terclockwise.
3. Push the turning handle (1) down.

7.13.3 Pneumatic foot lifting

Installation information is provided in  Additional manual
0791 867704.
1
6
4
8
10
2
(1) - Turning handle
(2) - Pressure indicator
Operating manual 867 Version 01.0 - 12/2012
Set-up instructions