90
7.12 Electrical connection
DANGER
Danger to life due to electric shock.
The machine may only be connected by trained
electrical specialists.
Disconnect the power plug before carrying out
work on the electrical equipment.
Make sure the power plug cannot be unintention-
ally reinserted.
The voltage on the type plate of the sewing drive
must correspond to the mains voltage.
7.12.1 Checking the mains voltage
Important: The voltage on the type plate of the sewing drive must
correspond to the mains voltage.
1. Check the mains voltage before connecting the machine.
7.12.2 Fitting and connecting the sewing lamp and
sewing lamp transformer
The sewing lamp is an additional component that is not part of the
standard delivery package.
DANGER
Danger to life due to electric shock.
The supply voltage for the sewing lamp remains
switched on when the sewing machine is switched
off
at the main power switch.
Pull out the power plug before fitting and connect-
ing the sewing lamp and sewing lamp transformer
Make sure the power plug cannot be unintention-
ally reinserted.
Operating manual 867 Version 01.0 - 12/2012
Set-up instructions