Removing The Transport Securing Devices - DURKOPP ADLER 867 Operating Manual

76
Standard equipment:
• Machine upper section (10)
• Oil pan (9)
• Thread reel holder with unwinding bracket (11)
• Controller (8)
• Keypad for the controller (1)
Optional additional equipment:
• Table plate (2)
• Drawer (3)
• Frame (4)
• Pedal (5)
• Knee lever/switch (6)
• Maintenance unit (7)
• Sewing light (not illustrated)

7.2 Removing the transport securing devices

All transport securing devices must be removed prior to set-up.
1. Remove the lashing straps and wooden blocks from the
machine upper section, the table and the frame.
2. Remove the supporting wedges between the machine arm
and needle plate.
Operating manual 867 Version 01.0 - 12/2012
Set-up instructions