DURKOPP ADLER 867 Operating Manual page 68

66
Figure 41: Points that need to be cleaned particularly thoroughly
1
2
(1) - Area around the needle
(2) - Hook
Areas particularly susceptible to soiling:
• Cutter on the bobbin winder for the hook thread (4)
• Area under the needle plate (3)
• Hook (2)
• Area around the needle (1)
Cleaning steps:
1. Switch off the power supply at the main switch.
2. Remove any sewing dust and thread remains using a com-
pressed-air pistol or a brush.
ATTENTION
Possible damage to the paintwork from solvent-based
cleaners.
Solvent-based cleaners damage the paintwork of the
machine.
Use only solvent-free substances for cleaning the machine.
(3) - Area under the needle plate
(4) - Cutter on the bobbin winder
Operating manual 867 Version 01.0 - 12/2012
Maintenance
4
3