Set-up instructions
Operating manual 867 Version 01.0 - 12/2012
7.10 Fitting the knee lever
The machine has either a mechanical or electrical knee lever,
depending on the submodel and equipment.
7.10.1 Fitting the mechanical knee lever
Figure 57: Fitting the mechanical knee lever
1
(1) - Knee lever rod
1. Fold the machine upper section back.
2. Fit the transmission rod (3) in the oil pan.
3. Screw the knee lever (1) rods together.
4. Guide the rod (1) through the hole in the oil pan (2) and connect
it to the transmission rod (3).
(2) - Hole in the oil pan
(3) - Transmission rod
3
87