Fitting The Electric Knee Lever - DURKOPP ADLER 867 Operating Manual

88

7.10.2 Fitting the electric knee lever

Figure 58: Fitting the electric knee lever
(1) - Knee switch
1. Screw the knee lever (1) in front of the oil pan firmly in place
under the table plate.
2. Guide the connecting cable (2) to the back between the oil
pan and the control.
3. Insert the plug (3) of the connecting cable in the socket of the
control.
1
2
3
(2) - Connecting cable
(3) - Plug
Operating manual 867 Version 01.0 - 12/2012
Set-up instructions