DURKOPP ADLER 867 Operating Manual page 59

Operating instructions
Operating manual 867 Version 01.0 - 12/2012
Figure 36: Function keys
2 3
Key for sewing backwards (2):
If the key (2) is selected the machine sews backwards.
Key for the position of the needle (3):
If the key (3) is selected the needle moves to a specific position.
This position is determined individually via the parameter set-
tings. For more information read the  service manual.
On delivery, the machine is set so that the needle is moved up
when the key (3) is activated.
Key for the start and end strips (4):
Key (4) cancels the general setting for sewing start and end
strips. If strips are switched on, pressing the key (4) disables the
next strip. If no strips are switched on, pressing the key (4) sews
the next strip. For the general setting for sewing start and end
strips, refer to the  manual for the DAC Classic controller.
Key for the stitch length (5):
If the key (5) is selected, the machine sews using the larger stitch
length selected at the upper adjusting wheel for the stitch length.
Key for the additional thread tension (6):
Key (6) switches on the additional thread tension.
Key for the vertical cutter (7):
(only for machines with a vertical cutter)
Key (7) switches on the vertical cutter.
When lifting the sewing foot the cutter is automatically switched
off and the key (7) is deactivated.
4 5 6 7
+/– +/–
57