Select: Utility Menus; Utilities: Set-Rtc; Utilities: Display-Bright; Utilities: Carrid - Comtech EF Data CDM-625 Installation And Operation Manual

CDM-625 Advanced Satellite Modem
Front Panel Operation

5.2.6 SELECT: Utility Menus

Utilities: Set-RTC Display-Bright
LED
◄ ►
Use the arrow keys to select Set-RTC, Display-Bright, CarrID, LED, Redundancy, Circuit-ID,
Firmware, or Em, and then press ENTER
5.2.6.1

Utilities: Set-RTC

Edit Real-Time Clock:
Time: 12:01:02
To edit the time and date settings of the Real-Time Clock, use the
digit to edit, and then use the
The date is shown in DAY-MONTH-YEAR format in accordance with European convention.
5.2.6.2

Utilities: Display-Bright

Edit Display Brightness:
To edit the brightness of the VFD (Vacuum Fluorescent Display), use the
select a suitable brightness level. The selectable values are 25%, 50%, 75% or 100%. Press
ENTER when done.
5.2.6.3

Utilities: CarrID

Chapter 19. CARRIER ID (M
Carrier ID:
Use the arrow keys to select the Carrier ID (MetaCarrier) function as Enabled or Disabled,
▲▼
and then press ENTER.
WHEN ENABLING CARRIER ID OPERATION, BE SURE TO CREATE A 24-CHARACTER
(MAX) CARRIER ID CUSTOM MESSAGE USING THE UTILITIES: CIRCUIT ID MENU (SEE
SECT. 5.2.6.6 Utilities: Circuit ID).
Redundancy Circuit-ID
.
Date:26/10/06
arrow keys to change that digit. Press ENTER when done.
▲▼
100%
C
ETA
Disabled
Firmware
®)
ARRIER
(Disabled, Enabled)
5–81
Revision 13
MN-CDM625
CarrID
Em
()
◄ ► arrow keys to select a
()
arrow keys to
▲▼
()