CDM-625 Advanced Satellite Modem
Preface
A NOTE gives important information about a task or the equipment.
A REFERENCE directs the user to additional information about a task or the
equipment.
Recommended Standard Designations
The new designation of the Electronic Industries Association (EIA) supersedes the Recommended
Standard (RS) designations. References to the old designations may be shown when depicting
actual text (e.g., RS-232) displayed on the Front Panel menus, Web Server pages, serial remote
interface, Telnet Command Line Interface (CLI), or unit rear panel. All other references in the
manual refer to EIA designations.
Metric Conversion
Metric conversion information is located on the inside back cover of this manual. This information
is provided to assist the operator in cross-referencing non-metric to metric conversions.
The user should carefully review the following information.
Safety and Compliance
Electrical Safety and Compliance
The unit complies with the EN 60950 Safety of Information Technology Equipment (Including
Electrical Business Machines) safety standard.
If the unit is operated in a vehicle or movable installation, make sure the unit is
stable. Otherwise, EN 60950 safety is not guaranteed.
Sect. 3.3 CDM-625 Ground and Power connections
Grounding
PROPER GROUNDING PROTECTION IS REQUIRED: The installation instructions
require that the integrity of the protective earth must be ensured and that the
equipment shall be connected to the protective earth connection at all times.
The CDM-625 is designed for connection to a power system that has separate
xxviii
Revision 13
MN-CDM625