Multicast Routing Configuration; Figure 16-12. Configuration Example For A Multicast Routing Network - Comtech EF Data CDM-625 Installation And Operation Manual

Advanced satellite modem (18 kbps – 25 mbps)

Hide thumbs Also See for CDM-625:

Table of Contents

CDM-625 Advanced Satellite Modem

Ethernet Network Configuration

16.4.2.1 Multicast Routing Configuration

To configure a Multicast Routing Network (Figure 16-12):

For "Hub Outbound" Modem Configuration – Referring to Sect. 6.5.4.3.3.1

Configuration | Routing | Routes in Chapter 6. ETHERNET-BASED PRODUCT

MANAGEMENT: Add a multicast route (using the page's Add New Route section),

making sure to select toWAN from the Interf. drop-down menu (this defines the route

as LAN  WAN). Click [Add Entry] once the route is created.

For "Remote" Modem Configuration – Referring to Section 6.5.4.3.3.2 Configuration |

Routing | IGMP in Chapter 6. ETHERNET-BASED PRODUCT MANAGEMENT: From the

page's IGMP Multicast Router section, edit the IGMP parameters to suit the multicast

receivers' capabilities (i.e., version number and query intervals).