Using the I/O Section
2-2
Using the I/O Section
2-2-1
Terminal Arrangement
PNP (sourcing) type
E5ZN-2@PH03@-FLK
2-2-2
Precautions when Wiring
Input power
supply
24 DC
Setting Display Unit
communications
RS-485
Host communications
RS-485
E5ZN-SCT24S-500
NPN (sinking) type
E5ZN-2@NH03@-FLK
E5ZN-SCT18S-500
• Separate signal leads and power lines in order to protect the E5ZN and its
lines from external noise.
• We recommend using solderless terminals when wiring the E5ZN.
• Tighten the terminal screws using a torque between 0.40 and 0.56 N·m.
• Use the following type of solderless terminals for M3 screws.
Refer to the E5ZN-SCT18S-500 for the layout for terminals 1 to 18.
Voltage-output type
12 VDC
Event input
21 mA
Contact
Non-
input
contact
input
Thermocouple/infrared temperature
sensor
Transistor-output type
12 VDC
21 mA
Pt
Analog input
5.8 mm max.
5.8 mm max.
Section 2-2
13