5-9-12 Ram Data Save; 5-9-13 Software Reset - Omron E5ZN Operation Manual

Commands and Responses

5-9-12 RAM Data Save

Command
Response

5-9-13 Software Reset

Command
Response
Command Related
MRC SRC
code information
"30" "05" "05"
This command writes operation/adjustment level setting data to internal non-
volatile memory. Refer to 6.3 6-3 Setup Level Configuration and Front Panel
Keys for information on operation/adjustment level.
This command can be used for either setting area 0 or 1.
Before executing the command, use an operation command to enable com-
munications writing.
Response code
MRC SRC
"30" "05" "0000"
Response code: The code shown above represents normal completion. For
details on the response code, refer to 5-7 Operation Commands .
Command Related
MRC SRC
code information
"30" "05" "06"
This command triggers a software reset, which returns the Temperature Con-
troller to its initial state when it was turned ON.
This command can be used in either setting area 0 or 1.
Before executing the command, use an operation command to enable com-
munications writing.
The Temperature Controller does not return a response to this command.
"00" or "10"
"00" or "10"
Section 5-9
79