Dead Band (C-Db); Manual Reset Value (Of-R) - Omron E5ZN Operation Manual

Adjustment Level
7-4-10 Dead Band (c-db
Function
Communications
Settings
7-4-11 Manual Reset Value (of-r
Function
Communications
Settings
See Also
126
c-db)
c-db c-db
Condition: The control system must be heating and cooling control.
This parameter sets the output dead band width in a heating and cooling con-
trol system. A negative setting sets an overlap band.
This parameter sets an area in which the control output is 0 centering around
the set point in a heating and cooling control system.
ch
1
2
FFFFF831H to 0000270FH (-199.9 to 999.9)
of-r)
of-r of-r
Condition: The control must be standard control or 2-PID control. The
"integral time" parameter must be set to 0.
This parameter sets the required manipulated variable to remove offset during
stabilization of P or PD control.
ch
1
2
00000000H to 000003E8H (0.0 to 100.0)
• Related Parameters
" PID/OnOff " (initial setting level) (page 130)
"Integral time" (adjustment level) (page 124)
Variable type
C1
C1
Setting range
Variable type
C1
C1
Monitoring range
Section 7-4
Address
0016
0116
Unit Default
EU 0.0
Address
0017
0117
Unit Default
% 50.0