Table of Contents
Advertisement
Cutting or dissolving in swap mode
The switcher issues the following reports when you swap the preview and program
outputs in stay mode:
Tke
X4
Bsy1
Out1•In
•All (or RGB or Aud)
X1
Out2•In
•All (or RGB or Aud)
X1
Bsy0
Input and output video type
Typ
X1
X5
A front panel input video type selection has occurred.
is the input video type.
X5
Rte
X6 X7
A front panel output video format selection has occurred.
resolution and
X7
Syn
X8
A front panel output video type selection has occurred.
format (RGBHV or RGBS).
Pol
X9
A front panel output video polarity selection has occurred.
polarity.
Picture adjustments
Col
X2
X10
A front panel color adjustment has occurred.
the adjusted input and
Tin
X2
X11
A front panel tint adjustment has occurred.
the adjusted input and
Brt
X2
X12
A front panel color brightness adjustment has occurred.
switched to the adjusted input and
Con
X2
X12
A front panel contrast adjustment has occurred.
to the adjusted input and
(SIS operation response only) The
switcher has received the SIS "Take" (%)
command.
The switcher is busy and will not respond
to any SIS commands.
The input to the program output has
changed (to the input that had been
switched to preview output).
The input to the preview output has
changed (to the input that had been
switched to program output).
The switcher is no longer busy and is able
to respond to SIS commands.
is the output refresh rate.
is the color variable.
X10
is the tint variable.
X11
is the brightness variable.
X12
is the contrast variable.
X12
Integration Seamless Switcher • Programmer's Guide
is the input number and
X1
is the output
X6
is the output video
X8
is the output sync
X9
is the output number switched to
X2
is the output number switched to
X2
is the output number
X2
is the output number switched
X2
4-5
Advertisement
Table of Contents
