Table of Contents
Advertisement
ISS
CUT
DISSOLVE
Press Cut or
Dissolve
Scaler A
Input 1
(program output)
Scaler B
Input 2
(preview output)
RS-232 Report
Stay Mode
Scaler A Changes Inputs
Figure 3-14 — Stay mode and swap mode
Use either the Adjust
PAL Film Mode submenu
The PAL Film Mode submenu lets you turn PAL film mode (2:2 pulldown
detection) on and off for the selected input. The PAL film mode should be used for
a video source that is PAL video that originated from film. PAL film mode applies
video processing algorithms that optimize the conversion of video that was made
with the 2:2 pulldown (PAL video from film) process.
Use either the Adjust
inputs as necessary to configure.
Reset submenu
The Reset submenu resets the ISS 108 or ISS 408 to the default values. Reset the
switcher by pressing and holding the Black/Mute button while this submenu is
active. The LCD displays Unit Reset to Factory Defaults when the reset is
complete. Release the Black/Mute button.
Program Monitor
Input 1
(input 2)
(program output)
Preview Monitor
Input 2
(input 2)
(preview output)
knob or the Adjust knob to select Stay or Swap.
knob or the Adjust knob to select On or Off. Select other
Integration Seamless Switcher • Operation
ISS
CUT
DISSOLVE
Press Cut or
Dissolve
Scaler A
Scaler B
NO RS-232 Report
Swap Mode
Neither Scaler Changes Inputs
Program Monitor
(input 2)
Preview Monitor
(input 1)
3-15
Advertisement
Table of Contents
