Command/Response Table For Ip Sis Commands - Extron electronics ISS 408 User Manual

Command/response table for IP SIS commands

= ISS name
X30
= GMT Time and date (set)
X31
= Time and date (read)
X32
= IP address
X33
= Password
X34
= Hardware address
X35
= Number of open connections 0 - 255
X36
Command
Set ISS name (location)
Read ISS name (location)
Set GMT/date
The date and time entered should be Greenwich Mean Time (GMT).
Read GMT/date
Set IP address
Read IP address
Read hardware address
Read # of open connections
Set administrator password
Read administrator password
Set user password
Read user password
When the computer is connected to the switcher via the RS-232 link, the Admin and User password
fields are not masked. If a password has been inadvertently changed to an unknown value, you can
look up and, if desired, change a password in this window without knowing the current password.
(Up to 240 characters)
MM/DD/YY-HH:MM:SS, where
MM = month: 01 (January) through 12 (December)
DD = day: 01 through 31
YY = year: 00 through 99
HH = hour: 00 through 24
MM = minutes: 00 through 59
SS = seconds: 00 through 59
In the format: Day,•DD•MMM•YYYY•HH:MM:SS GMT, where
Day = weekday: Mon through Sun
DD = day: 01 through 31
MM = month: Jan through Dec
YYYY = year: 2000 through 2099
HH = hour: 00 through 24
MM = minutes: 00 through 59
SS = seconds: 00 through 59
###.###.###.###
12 digits, alphanumeric
##-##-##-##-##-##
ASCII Command Response
(host to switcher) (switcher to host)
CN Ipn•
Esc X30
CN
Esc X30
CT Ipt•
Esc X31
CT
Esc X32
CI Ipi•
Esc X33
CI
Esc X33
CH
Esc X35
CC
Esc X36
• CA Ipa•
Esc X34
CA
Esc X34
• CU Ipu•
Esc X34
CU
Esc X34
Integration Seamless Switcher • Programmer's Guide
Additional description
X30
X32
The switcher sends the response,
X33
but the host may not receive it.
X34
X34
4-15