Table of Contents
Advertisement
Audio controls and indicators
Audio configuration/save button and LED — The Audio button and LED
3
enable the user to view and/or change the current audio level setting for each
input. See "Audio gain and attenuation (SW2 RGBHV A, SW4 RGBHV A,
and SW6 RGBHV A only)", later in this chapter.
Down (
4
level for a selected input. The LED flashes each time the button is pressed to
indicated a 1 dB decrease in the audio level. See "Audio gain and attenuation
(SW2 RGBHV A, SW4 RGBHV A, and SW6 RGBHV A only", later in this
chapter.
On the SW2 RGBHV A, this button and LED are secondary functions of the
Input 1 button and LED. On the SW6 RGBHV A, this button and LED are
secondary functions of the Input 5 button and LED.
Up ( ) button and LED — The
5
for a selected input. The LED flashes each time the button is pressed to
indicated a 1 dB increase in the audio level. See "Audio gain and attenuation
(SW2 RGBHV A, SW4 RGBHV A, and SW6 RGBHV A only)", later in this
chapter.
On the SW2 RGBHV A, this button and LED are secondary functions of the
Input 2 button and LED. On the SW6 RGBHV A, this button and LED are
secondary functions of the Input 6 button and LED.
–dB/+dB LEDs — The –dB and +dB LEDs indicate the polarity of the audio
6
level setting. See "Audio gain and attenuation (SW2 RGBHV A,
SW4 RGBHV A, and SW6 RGBHV A only)", later in this chapter.
Audio level indicators (SW4 RGBHV A and SW6 RGBHV A only) — The
7
Input 1 through Input 4 LEDs indicate a range of 6 dB when lit (Input 1 LED
off = 0 dB to 5 dB, Input 1 LED lit = 6 dB to 11 dB, Input 2 LED lit = 12 dB to
17 dB, and so on). See "Audio gain and attenuation (SW2 RGBHV A,
SW4 RGBHV A, and SW6 RGBHV A only)", later in this chapter.
Autoswitch mode control and indicator
When autoswitching is enabled, the switcher continuously monitors all inputs and
automatically switches to the highest-numbered input with video sync pulses
present. If video is absent from all inputs, no input is selected.
Auto/Manual switch — The rear panel Auto/Manual toggle switch
8
(figure 3-3) selects autoswitching mode or manual switch mode.
Figure 3-3 — Rear panel Auto/Manual switch
Auto Switch Active LED — When lit, the front panel Auto Switch Active LED
9
indicates that the switcher is in autoswitch mode. When the LED is unlit, the
switch is in normal (manual) mode.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
) button and LED — The
button is used to increase the audio level
SW4 and SW6
SW2 Models
Models
REMOTE
H/HV
V
AUTO
REMOTE
AUTO
MANUAL
MANUAL
8
8
SW RGBHV Series Switchers • Operation
button is used to decrease the audio
3-3
Advertisement
Table of Contents
