Removing An Sdram Module (User-Replaceable); Figure 2-3. Removing The Sdram Cover; Table 2-4. Sdram Module Replacement Part Numbers - HP Omnibook XE3 Service Manual

Removing an SDRAM Module
(User-Replaceable)
The notebook has no SDRAM on its motherboard, but has slots for two SDRAM modules.
Description
Module, SDRAM, 128 MB, PC133 SODIMM
Module, SDRAM, 256 MB, PC133 SODIMM
Caution
Provide proper grounding and handle the SDRAM module only by its edges, or you could damage
the module through electrostatic discharge.
Required Equipment
#0 Phillips screwdriver.
Removal Procedure
1. Unplug the AC adapter, if present, and remove the battery.
2. On the bottom of the notebook, loosen both screws holding the SDRAM cover (the cover retains
the screws), and remove the cover.
HP Omnibook XE3 (Technology Codes GE and GD)

Table 2-4. SDRAM Module Replacement Part Numbers

Figure 2-3. Removing the SDRAM Cover

Part Number Exchange Part Number
1818-8504
1818-8635
Removal and Replacement 2-5