Removing the Floppy Disk Drive
(HP Authorized Service Providers Only)
Required Equipment
#0 Phillips screwdriver.
Removal Procedure
1. Unplug the AC adapter, if present, and remove the battery.
Keyboard cover (page 2-10).
Keyboard (page 2-12).
Display assembly (page 2-18).
Top case (page 2-22).
Hinge saddle set (page 2-25).
2. Release the drive's ribbon cable from its connector on the motherboard.
3. Remove the two retaining screws.
4. Lift the floppy drive out of the notebook.
2-32
Removal and Replacement
HP Omnibook XE3 (Technology Codes GE and GD)