Replacing The Bottom Case; Figure 2-25. Installing The Pcmcia Doors - HP Omnibook XE3 Service Manual

Replacing the Bottom Case

Installation Procedure
1. Install a new Microsoft Product ID label.
2. Transfer the old serial number label and install a new overlay, or create a new serial number label
using the steps below.
3. If you need to install or replace the PCMCIA doors, refer to the figure below.
2-38 Removal and Replacement

Figure 2-25. Installing the PCMCIA Doors

HP Omnibook XE3 (Technology Codes GE and GD)