HP Omnibook XE3 Service Manual page 98

System Devices Menu
PS/2 Pointing Devices
External Fn Key
IDE Controller
(selected models)
FDD Controller
LCD Status Panel Display
LCD Status Panel Date
Format
LCD Status Panel Time
Format
Security Menu
User Password is
Administrator Password is
Set User Password
Set Supervisor Password
Password Required to
Boot
Boot Menu
Exit Menu
Saving Changes and Exit
Discarding Changes
and Exit
Get Default Values
Load Previous Values
Save Changes
3-34 Troubleshooting and Diagnostics
Description
Enables (Both) or disables (Auto) the internal pointing devices
when an external PS/2 mouse is connected.
Not on all models. Sets whether left Ctrl+left Alt on an
external keyboard is interpreted as the Fn key.
Enables the primary channel (Primary), primary and
secondary channel (Both), or neither (Disabled).
Enables the floppy drive.
Enables display on the status panel.
Sets the date format used in the status panel.
Sets the time format used in the status panel.
Description
Shows if a user password is set.
Shows if an administrator password is set.
Press Enter to set, change, or clear the user password. (The
administrator password must be set first.) The password can
have no more than 8 characters (0–9, A–Z), and cannot
include special or accented characters.
Press Enter to set, change, or clear the administrator
password, which protects BIOS Setup settings. The password
can have no more than 8 characters (0–9, A–Z), and cannot
include special or accented characters.
Sets whether a user password is required when the notebook
boots. Requires the administrator password for changes.
Description
Shows the order of boot devices. Use the F5 and F6 keys to
change the order.
Description
Saves Setup changes to CMOS, then exits and reboots.
Discards any Setup changes made since last save, then exits
and reboots. Does not affect security, date, or time changes.
Restores default settings, and remains in Setup. Does not
affect security, date, or time changes.
Discards any Setup changes made since last save, and
remains in Setup. Does not affect security, date, or time
changes.
Saves Setup changes to CMOS, and remains in Setup.
Security settings are saved when changed.
HP Omnibook XE3 (Technology Codes GE and GD)
Default
Auto
Enabled
Both
Enabled
Enabled
mm/dd/yy
hh:mm AM/PM
(24-hour format)
Default
Clear
Clear
Enter
Enter
Enabled
Default
1. Hard Drive
2. Floppy Disk
3. CD-ROM/DVD
Drive