Removing The Hinge Saddle Set (Hp Authorized Service Providers Only); Figure 2-17. Removing The Hinge Saddle Retaining Screws - HP Omnibook XE3 Service Manual

Removing the Hinge Saddle Set
(HP Authorized Service Providers Only)
Required Equipment
#0 Phillips screwdriver.
Removal Procedure
1. Unplug the AC adapter, if present, and remove the battery.
2. Remove these additional assemblies:
Keyboard cover (page 2-10).
Keyboard (page 2-12).
Display assembly (page 2-18).
Top case (page 2-22).
3. Remove the two retaining screws from the bottom case.
HP Omnibook XE3 (Technology Codes GE and GD)

Figure 2-17. Removing the Hinge Saddle Retaining Screws

Screws,
M2.5x8 mm (2)
Removal and Replacement 2-25