Diagnostic Tools; E-Diagtools Diagnostic Program; Figure 3-2. E-Diagtools Screens - Basic And Advanced - HP Omnibook XE3 Service Manual

Diagnostic Tools

This section describes the following diagnostic tools you can use for troubleshooting and repairing the
notebook:
e-DiagTools diagnostic program (below).
Power-on self-test (page 3-28).
Sycard PCCtest 450 PC Card (page 3-31).
Desktop Management Interface (page 3-32).
BIOS Setup utility (page 3-33).

e-DiagTools Diagnostic Program

The e-DiagTools hardware diagnostic program provides two levels of testing:
Basic user-level hardware test.
Advanced individual hardware tests.
Figure 3-2. e-DiagTools Screens — Basic and Advanced
The tests are designed to run after the system restarts, so that the notebook will be in a predictable
state during the tests. The tests are non-destructive, and are intended to preserve the state of the
notebook. The notebook restarts when you exit the program so drivers can be loaded.
Updating e-DiagTools
You can download the latest version of e-DiagTools from the HP Notebook web site (see page vi).
Follow the instructions included with the new version.
3-22 Troubleshooting and Diagnostics HP Omnibook XE3 (Technology Codes GE and GD)