Removing a Plug-In Accessory Module
(User-Replaceable)
Note
Plug-in accessory modules have no repairable components. A defective module must be
exchanged.
Required Equipment
• None.
Removal Procedure
1. Slide the safety latch for the plug-in slot into its recess.
2. Slide and hold the release latch, then slide out the module.
Reassembly Note
Caution
Be sure the safety latch is open before you insert the module. Otherwise, the release latch could
break if you force the module in.
• After installing the module, close the safety latch.
2-4
Removal and Replacement
Figure 2-2. Removing a Plug-In Module
HP OmniBook 2100/3000/3100