Removing Notebook Components (Hp Authorized Service Providers Only); Table 2-11. Removing Notebook Components - HP Omnibook XE3 Service Manual

Removing Notebook Components
(HP Authorized Service Providers Only)
Required Equipment
#0 Phillips screwdriver.
Small flat-blade screwdriver.
5 mm hexagonal socket screwdriver.
Removal Procedure
1. Unplug the AC adapter, if present, and remove the battery.
2. Remove the assemblies and follow the additional steps given in the table below.
Component
Case, bottom
Case, top
Cover, keyboard
CPU module
Display assembly
Doors, PCMCIA
Drive, CD/DVD
Drive, floppy disk
Heatsink assembly
2-40 Removal and Replacement

Table 2-11. Removing Notebook Components

Removal Procedure
See page 2-35.
See page 2-22.
See page 2-10.
See page 2-30.
See page 2-18.
Mini-PCI PCA (page 2-7).
Keyboard cover
(page 2-10).
Keyboard (page 2-12).
Hard disk drive
(page 2-14).
Display assembly
(page 2-18).
Top case (page 2-22).
Hinge saddle set
(page 2-25).
Video PCA (page 2-27).
Heatsink assembly
(page 2-29).
CPU module (page 2-30).
Floppy disk drive
(page 2-32).
CD/DVD drive
(page 2-34).
Motherboard (page 2-35).
See page 2-34.
See page 2-32.
See page 2-29.
Additional Steps
See the figure on page 2-38.
HP Omnibook XE3 (Technology Codes GE and GD)