Shindaiwa DGW310DMC Owner's Manual page 6

Caution: Burns
● Do not touch the engine and muffler during operation and immediately after stopping the equipment,
for the temperature can reach extremely high.
● When checking engine oil or changing oil, always stop the engine, and wait until the engine cools
down. If you open either the oil gauge or the oil plug during operation, hot oil may cause some
injuries.
● Be sure to wear leather gloves, apron, shoe covers, eye protection glass (es) (mask), safety shoes,
and safety cap and long sleeve shirts, because welding splashes spatters.
Caution: Injuries
● When lifting the equipment, always use a lift hook. Do not lift the handle, for it may cause the
equipment to drop due to handle breaking off.
● When carrying the equipment by truck, fix it strongly to keep the equipment from sliding as roping
two points of handle.
● Always place the equipment on a flat and stable surface, to keep it from sliding. Be sure to lock the
wheels for with wheel type.
● When starting the engine, turn off the connected equipment
● And set the circuit breaker to
● Do not move the equipment during operation.
● When performing equipment check and maintenance, always stop the engine.
● Do not operate the equipment if the equipment are modified or parts are removed
O FF p osition.
『 』
4