Shindaiwa DGW310DMC Owner's Manual page 37

C aution
＜ ＜ ＞ ＞
＜ ＜ ＞ ＞
●Clean more frequently when it is used in dusty environment.
●Air Element Part No.: 1G347-11181 (Kubota)
(4) Clean/Change Fuel Strainer
Clean
Change
1 Turn the fuel lever to
2
Unscrew the retainer ring counterclockwise
And remove the cup and filter element.
3
Discard any dust or water inside the cup
and clean the filter by blowing compressed
air. (or replace element)
4 Reassemble it back.
C aution
＜ ＜ ＞ ＞
＜ ＜ ＞ ＞
●Be sure to check for any contaminants on the packing whenever reinstalling the cup.
●Be sure to confirm no fuel leakage by opening the fuel lever
to O PEN . Turn the lever to
『 』
●Fuel Element Part No.: 16271-43561 (Kubota)
(5) Drain water in fuel tank
Drain
1 Unscrew the fuel drain plug.
2 Reinstall the drain plug after draining
water completely.
C aution
＜ ＜ ＜ ＜ ＞ ＞ ＞ ＞
●
Change the packing whenever draining water
● Packing Part No.: 6C090―58961 (Kubota)
● Confirm no fuel leakage after reinstalling the fuel drain plug.
st nd
1 at 50 hrs 2 or after 200 hrs
Every 400 hrs
C LOSE .
『 』
C LOSE
『 』
At every 200 hrs
.
Close
Fuel lever
Open
f inally after confirmation.
35
Retainer ring
Cup
Fuel Drain Plug