Long-Term Storage - Shindaiwa DGW310DMC Owner's Manual

(6) Change Coolant/Water
Change
T otal capacity: 3L (including Sub Tank: 0.6L
＜
1 Open the top door.
2 Remove the radiator cap.
3 Remove the water drain plug.
4 After draining all the water, reinstall
the water drain plug.
C aution
＜ ＜ ＜ ＜ ＞ ＞ ＞ ＞
●Change the packing whenever changing
coolant/water.
●Packing Part No.: 6C090―58961 (Kubota)
5 Replace all the water in the sub tank.
6 Fill water to Max Level (to the water inlet)
7 Reinstall the radiator cap.
8 Close the top door.
C aution
＜ ＜ ＜ ＜ ＞ ＞ ＞ ＞
●After supplying water, keep the engine drive for
a while to check no water leakage and then stop the engine

12. Long-Term Storage

Danger: Electric Shock
●.
When performing check and maintenance, always stop the engine
Caution: Injuries
●When performing check and maintenance always stop the engine
Caution: Fire/Burns
△
● Keep the equipment far away from fire.
● Do not touch the engine and muffler during operation or immediately after stopping the equipment for the
temperature reaches extremely high.
At 2000 hrs or 2 yrs
） ＞
Top Door
Sub Tank
Coolant Drain Plug ﾞ
36
Radiator
Cap
Water Inlet