And Keep Near For Readily Use - Shindaiwa DGW310DMC Owner's Manual

Generator/welder vertical, water-cooled 4-cycle diesel engine
Hide thumbs Also See for DGW310DMC:
Table of Contents

Advertisement

(1) Water Temperature Monitor Lamp
Danger: Injuries
Close all the doors and place lock during operation, to avoid injuries by unintentional touch of cooling
fan or fan belt.
Danger: Burns
●Do not open the radiator cap while operating this equipment or immediately after
Caution: Burns
●Do not touch the engine and muffler during operation and immediately after stopping it, for
When the water temperature rises abnormally, the water temperature lamp flashes and the automatic
shutdown will be engaged.
When this happens, check water tank and replenish if needed.
temperature
If the water level is normal, there may be possibility of overload. Always use the equipment within the
rated duty cycle and output power.
(2) Battery Charge Monitor Lamp
When the battery charge becomes unable during operation, the monitor lamp flashes and the automatic
shutdown is engaged.
Please consult with our authorized distributor or service section.
C aution
< < < <
> > > >
●The monitor cannot detect battery degradation or insufficient battery liquid.
Be sure to check battery liquid level periodically.
(Refer to
6 -5. Battery Check
(3) Oil Pressure Monitor Lamp
Danger: Injuries
●Close all the doors and place lock during operation, to avoid injuries by unintentional touch
of cooling fan or fan belt.
)
11
R efer to
6 -2. Check the water

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dgw310mc

Table of Contents