Operation; S Tart - Shindaiwa DGW310DMC Owner's Manual

Generator/welder vertical, water-cooled 4-cycle diesel engine
Hide thumbs Also See for DGW310DMC:
Table of Contents

Advertisement

7. Operation

7. Operation
7. Operation
7. Operation
Danger: Suffocation from exhaust fume
●Exhaust fume from engine contains many elements harmful to human. Do not operate this
equipment in poorly ventilated area such as inside room or in tunnel
Caution: Suffocation from exhaust fume
Do not point the exhaust fume toward pedestrians or building.
Caution: Fire
●Temperature around muffler and exhaust can get extremely high. Keep any inflammable items
(such as fuel, gas, paint, etc.) away from the equipment.
●Always operate this equipment on flat surface and at least 1 meter away from any objects (wall,
box, etc.)
Caution: Injuries
●Always place the equipment on flat and stable surface to keep the equipment from sliding and lock
wheels if they have.
●Before starting, turn the load switch OFF and set the
Equipment breaker
7-1. Starting
1. Turn the breakers to
2. Turn the fuel lever to
3. Turn the Slow-Down Switch to
4. When the temperature is below 5℃ turn and keep the starter Switch at
lamp turns OFF (about 5 seconds).
5. Turn the starter switch to
C AUTION
● Do not drive the starter motor for more than 15 seconds successively.
● If you need to restart, wait for 30 seconds or more before retry.
6. Once the engine has started, release hand offs the starter switch.
C aution
● Once the engine has started, never turn the switch to
O FF
.
O FF
.
O PEN
.
O N
.

S TART

. And then the engine starts by the starter motor.
S TART
.
20
P REHEAT
u ntil the preheat

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dgw310mc

Table of Contents