Initialization & Pre-Check; C Hecking Engine Oil - Shindaiwa DGW310DMC Owner's Manual

6. Initialization and Pre-check
Caution: Fire/Burns/Injuries
△
● When checking engine, always stop the engine and keep away from hire.
Wait until the engine cools down before performing any check.
6-1. Engine Oil
When checking engine oil, be sure to
Keep the equipment leveled and insert
The oil gauge all the way in.
Before starting the equipment, make
Sure to fill the engine oil to the UPPER
Line through the oil inlet.
C aution
＜ ＜ ＜ ＜ ＞ ＞ ＞ ＞
●If the equipment is not levels, you cannot obtain accurate oil level. Do not overfill (over UPPER line) the
engine oil. The excessive oil may damage the engine (inside cylinder).
■Selection of proper engine oil
Select the proper viscosity engine oil in compliance with ambient temperature. (Refer to the chart below)
C aution
＜ ＜ ＞ ＞
＜ ＜ ＞ ＞
●Use the API class CD or higher.
Viscosity and temperature
Temperature
Viscosity
Over+20 +10
℃
SAE30
Oil Drain Plug
+ 20 -10
～ ℃
SAE20 SAE10W/30
16
ﾞ
+ 40
～ ℃
Oil Gage
ﾞ
Oil Plug
Oil Inlet