Safety Guidelines - Shindaiwa DGW310DMC Owner's Manual

1. Safety Guidelines

1. Safety Guidelines 1. Safety Guidelines 1. Safety Guidelines
Danger: Suffocation from exhaust fume
● Exhaust fume from the engine contains many elements harmful to human.
Do not operate this equipment in poorly ventilated areas, such as inside a
room or in a tunnel.
Danger: Electric Shock
● Do not touch the output terminals during operation
● Do not insert metal objects (such as pin or wire) into receptacle
● Do not touch wires or electric parts inside the equipment during operation.
● Before connecting or disconnecting a load cable from output terminals, always turn the circuit
breaker to OFF position.
● Before connecting or disconnecting a load cable from output terminals, always turn the circuit
breaker to OFF position.
● Before connection or disconnection a welding cable from DC output terminal, stop the engine
and remove the engine key.
● Before performing any equipment check or maintenance, stop the engine and remove the
engine key. A maintenance person should always keep the key.
Danger: Burns
● Do not open the radiator cap while operating this equipment or immediately after stopping the
equipment, to avoid sustaining burns from hot vapor.
Danger: Injuries
● Close all doors and place locks during operating this equipment, to avoid injuries by
unintentional touching a cooling fan and fan belt.
Caution: Suffocation from exhaust fume
● Do not point the exhaust fume toward pedestrians or building.
Caution: Suffocation from exhaust fume
● Be sure to wear a fume proof mask in operation, because welding fume contains poisonous gas
and dust. Pay attention to the airflow direction and ventilation also in order to prevent from
inhaling the fume.
2