Boiler Inspection And Maintenance; Why Is Regular Maintenance Important; Testing The Flue System, Including Combustion Air, Air Inlets And Ventilation Openings; Inspection Of The Boiler And Burner - Buderus Logano GC124 II/SP Installation And Service Instructions Manual

Boiler inspection and maintenance

16 Boiler inspection and maintenance

16.1 Why is regular maintenance important?

Heating systems require regular maintenance for the
following reasons:
– to maintain high efficiency operation and to operate
the heating system economically (low fuel consump-
tion),
– to sustain safe operation,
– to maintain combustion at an environmentally re-
sponsible level.
– to ensure trouble-free operation and long life.
All maintenance work must be carried out by a qualified
boiler technician. When replacing components use only
parts approved by Buderus. Maintenance is required
once a year. Record the results of the inspection in the
protocol on page 53.
USER NOTE
Spare parts can be ordered from the
spare parts catalog.

16.2 Testing the flue system, including combustion air, air inlets and Ventilation openings

Check the venting system, including the combustion air,
inlet and outlet openings. All faults must be repaired im-
mediately. Make sure that the combustion air feed and
the inlets and outlets are not blocked at any point.

16.3 Inspection of the boiler and burner

1. Visually check the boiler and burner for external dirt.
2. If dirt is found, clean boiler and burner.
We reserve the right to make any changes due to technical modifications.
Installation and maintenance instructions Gas Boiler Logano GC124 II/SP • Issue 07/2006
16
43