Appletalk Menu - Lexmark X548 Series User Manual

Menu item
Enable IPv6
On
Off
Auto Configuration
On
Off
Set Hostname
View Address
View Router Address
Enable DHCPv6
On
Off

AppleTalk menu

This menu is available from the Network/Ports menu:
Network/Ports > Standard Network or Network [x] > Standard Network Setup or Network [x] Setup > AppleTalk
Menu item
Activate
Yes
No
View Name
View Address
Set Zone
[default]
[list of zones available on the network]
Description
Enables IPv6 in the printer
Note: On is the factory default setting.
Specifies whether the network adapter accepts the automatic IPv6
address configuration entries provided by a router
Note: On is the factory default setting.
Lets you view or change the current IPv6 host name
Lets you view the current setting
Note: These settings can be changed only from the Embedded Web
Server.
Enables DHCPv6 in the printer
Note: On is the factory default setting.
Description
Activates AppleTalk support
Note: Yes is the factory default setting.
Shows the assigned AppleTalk name
Note: The name can be changed only from the Embedded Web Server.
Shows the assigned AppleTalk address
Note: The address can be changed only from the Embedded Web Server.
Provides a list of AppleTalk zones available on the network
Note: When "default" is selected, the printer uses the AppleTalk zone that the
router identifies as the default zone for the network. If no default zone exists,
then the zone marked with an * is the default setting.
Understanding printer menus
142