Lexmark X548 Series User Manual page 162

Menu item
Color Dropout
Color Dropout
None
Red
Green
Blue
Default Red Threshold
0–255
Default Green Threshold
0–255
Default Blue Threshold
0–255
Contrast
Best for Content
0–5
Mirror Image
Off
On
Negative Image
Off
On
Shadow Detail
-4 to 4
Scan edge to edge
Off
On
Sharpness
1–5
Temperature
-4 to 4
Sample Copy
Off
On
Description
Specifies which color to drop during copy jobs, and how much increase or
decrease there is in the dropout
Notes:
•
None is the factory default setting for Color Dropout.
• 128 is the factory default setting for each color threshold.
Specifies the contrast used for the copy job
Note: Best for Content is the factory default setting.
Creates a mirror image of the original document
Note: Off is the factory default setting.
Creates a negative image of the original document
Note: Off is the factory default setting.
Adjusts the amount of shadow detail visible on a copy job
Note: 0 is the factory default setting.
Specifies if the original document is scanned edge-to-edge
Note: Off is the factory default setting.
Adjusts the amount of sharpness of a copy job
Note: 3 is the factory default setting.
Enables the user to specify "warm" or "cool" outputs. "Cool" values generate
a bluer output than the default, while "warm" values generate a redder
output than the default.
Creates a sample copy of the original document
Note: Off is the factory default setting.
Understanding printer menus
162