Appletalk Menu - Lexmark CS510 User Manual

Understanding the printer menus
To access the menu, navigate to:
Network/Ports > Network [x] > Network [x] Setup > Wireless
Use
Wi‑Fi Protected Setup
Start Push Button Method
Start PIN Method
Enable/Disable WPS Auto‑detection
Enable
Disable
Network Mode
BSS Type
Infrastructure
Ad hoc
Compatibility
802.11b/g
802.11b/g/n
Choose Network
View Signal Quality
View Security Mode

AppleTalk menu

Note: This menu is available only in printer models connected to a wired network or when an optional
network card is installed.
To access the menu, navigate to any of the following:
•
Network/Ports > Standard Network > Standard Network Setup > AppleTalk
•
Network/Ports > Network Setup [x] > AppleTalk
Use
Activate
Yes
No
View Name
To
Establish a wireless network and enable network security.
Notes:
•
Start Push Button Method connects the printer to a wireless
network when buttons on both the printer and the access point
(wireless router) are pressed within a given period of time.
•
Start PIN Method connects the printer to a wireless network
when a PIN on the printer is entered into the wireless settings
of the access point.
Automatically detect the connection method that an access point
with WPS uses—Start Push Button Method or Start PIN Method.
Note: Disable is the factory default setting.
Specify the network mode.
Notes:
•
Infrastructure is the factory default setting. This lets the printer
access a network using an access point.
•
Ad hoc configures wireless connection directly between the
printer and a computer.
Specify the wireless standard for the wireless network.
Note: 802.11b/g/n is the factory default setting.
Select an available network for the printer to use.
View the quality of the wireless connection.
View the encryption method for the wireless network.
To
Enable or disable AppleTalk support.
Note: Yes is the factory default setting.
Show the assigned AppleTalk name.
Note: The name can be changed only from the Embedded Web Server.
85