Using Ws-Scan - Lexmark X548 Series User Manual

Using My MFP
My MFP lets you use the printer with a personalized profile. Each time you insert your flash drive into the USB port of
a printer that supports My MFP, your preferred settings are automatically loaded.
1
Insert your flash drive into the USB port.
If you have set password-protect for your profile, then enter your password to continue.
2
Select the function you want to use.
If individual functions such as print, copy, or fax are protected by a password or PIN, then you must enter the correct
credentials to use those functions.
3
When you are finished, remove your flash drive from the printer.
Deleting My MFP data from your USB drive
Using the My MFP interface
1
Touch My MFP Configuration.
2
From the Welcome screen use the arrows to scroll through the list of options until you see Remove My MFP data
from the drive.
3
Touch Remove My MFP data from the drive.
4
Select Delete profile, and touch Save Setting to clear your My MFP settings from your USB drive.
Manually deleting the data
1
Insert your USB drive into a computer.
2
Locate all files beginning with .mymfp (they will be grouped together).
3
Delete all files beginning with .mymfp.

Using WS-Scan

The Web Services - Scan application lets you scan documents at the printer, and then send the scanned image to your
computer. This application is available only for network printers and computers that support Microsoft Web Services.
To scan documents at the printer, see "Scanning documents at the printer" on page 24.
Setting up WS-Scan
1
From the computer screen, click
2
In the Start Search or Run box, type control printers.
3
Press Enter, or click OK.
4
Click Add a printer, and then select Add a network, wireless or Bluetooth printer.
Note: The wireless or Bluetooth connection is available only on select printer models.
, or click Start and then click Run.
Setting up and using the home screen applications
27