Table of Contents
Advertisement
•
Flex a stack of envelopes back and forth to loosen them. Straighten the edges on a level surface.
Warning—Potential Damage: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or
self-stick adhesives. These envelopes may severely damage the printer.
5
Locate the stack height limiter and tab.
Note: Do not exceed the maximum stack height by forcing paper under the stack height limiter.
1
Tab
2
Stack height limiter
3
Width guide
4
Size indicators
6
Load the paper, and then adjust the width guide to lightly touch the edge of the paper stack.
•
Load paper, card stock, and transparencies with the recommended print side facedown and the top edge
entering first.
•
Load envelopes with the flap side up.
Notes:
•
Do not load or close the multipurpose feeder while a job is printing.
•
Load only one size and type of paper at a time.
2
1
4
3
Loading paper and specialty media
56
Advertisement
Table of Contents
Troubleshooting
