Table of Contents
Advertisement
3
Delete all files beginning with .mymfp.
Solving option problems
Option does not operate correctly or quits after it is installed
Try one or more of the following:
R
ESET THE PRINTER
Turn the printer off, wait for about 10 seconds, and then turn the printer on.
C
HECK TO SEE IF THE OPTION IS CONNECTED TO THE PRINTER
1
Turn the printer off using the power switch.
2
Unplug the power cord from the wall outlet, and then from the printer.
3
Check the connection between the option and the printer.
M
AKE SURE THE OPTION IS INSTALLED CORRECTLY
Print a menu settings page and check to see if the option is listed in the Installed Options list. If the option is not
listed, then reinstall it. For more information, see the hardware setup documentation that came with the option, or
go to www.lexmark.com to view the option instruction sheet.
M
AKE SURE THE OPTION IS SELECTED
From the computer you are printing from, select the option.
For more information, see "Updating available options in the printer driver" on page 43.
Drawers
M
AKE SURE THE PAPER IS LOADED CORRECTLY
1
Open the paper tray.
2
Check for paper jams or misfeeds.
3
Make sure paper guides are aligned against the edges of the paper.
4
Make sure the paper tray closes properly.
5
Close the door.
R
ESET THE PRINTER
Turn the printer off. Wait 10 seconds. Turn the printer back on.
Troubleshooting
268
Advertisement
Table of Contents
Troubleshooting
