Custom Scan Sizes Menu; Universal Setup Menu - Lexmark X548 Series User Manual

Custom Scan Sizes menu

Menu item
Custom Scan Size [x]
Scan Size Name
Width
1–11.69 inches (25–297 mm)
Height
1–17 inches (25–432 mm)
Orientation
Portrait
Landscape
2 scans per side
Off
On

Universal Setup menu

Menu item
Units of Measure
Inches
Millimeters
Portrait Width
3–14.17 inches
76–360 mm
Portrait Height
3–14.17 inches
76–360 mm
Feed Direction
Short Edge
Long Edge
Description
Specifies a custom scan size name, scan sizes, and options. The custom scan
size name replaces Custom Scan Size [x] in the printer menus.
Notes:
•
11.69 inches is the US factory default setting for Width. 297 millimeters is
the international factory default setting for Width.
• 17 inches is the US factory default setting for Height. 432 millimeters is the
international factory default setting for Height.
• Portrait is the factory default setting for Orientation.
• Off is the factory default setting for 2 scans per side.
Description
Identifies the unit of measure
Note: Inches is the US factory default setting. Millimeters is the
international factory default setting.
Sets the portrait width
Notes:
•
8.5 inches is the US factory default setting. Inches can be increased in
0.01-inch increments.
•
216 mm is the international factory default setting. Millimeters can be
increased in 1-mm increments.
•
If the width exceeds the maximum, then the printer uses the maximum
width allowed.
Sets the portrait height
Notes:
•
14 inches is the US factory default setting. Inches can be increased in
0.01-inch increments.
•
356 mm is the international factory default setting. Millimeters can be
increased in 1-mm increments.
•
If the height exceeds the maximum, then the printer uses the
maximum height allowed.
Specifies the feed direction
Notes:
•
Short Edge is the factory default setting.
• Long Edge appears only if the longest edge is shorter than the
maximum width supported by the tray.
Understanding printer menus
136